Assembly Laboratory
-
Preparation of electrode slurry.
-
Slurry coating of electrodes.
-
Electrode pressing and slitting.
-
Assembly of coil cells.

Equipment | Principle | |
1 | Glove Box with Gas Purification System |
A glove box provides a low-humidity and low-oxygen levels (water, oxygen: <1 ppm) environment which is required for the process of lithium ion battery packaging. |
|
||
2 | Spray Dryer |
A solid-containing suspension is mist-sprayed with high pressure and dispersed in the hot air. Particles are formed after rapid drying, and then powder products can be separated from the gas flow. |
![]() |
||
3
|
Nano Spray Dryer
|
Micro-scale droplets are produced by ultrasonic oscillation with a piezoelectric film. Then, the droplets are dried in the hot air, and collected to form nano-level powder samples by electrostatic techniques. |
![]() |
||
4 | High Energy Ball Mill |
The equipment using frictional and collision force to combine the material fast.
the highest speed can up to 2000 min-1. The cooling system can avoid grinding high speed process of energy affect the material. Promoting the homogeneity of material.
|
![]() |
||
5 | Conductivity meter | When current pass through 1cm2 cross-sectional area and long 1cm liquid column situation resistance’s reciprocal, the unit is mho/cm, when the conductivity much lower has use 10-3 or 10-6 as unit. That is mho / cm or μmho / cm. Before testing the water of conductivity must have to use the standard of conductivity solution to regulate the conductivity. |
![]() |